Thermoscan® field operators are qualified electricians who will work with you to identify faults before turning into costly failures. Thermoscan projects require intense skills training and a crafted skillset. Take a look at what we’ve done for past clients.

• Case Study
  THERMOGRAPHY INSPECTION IDENTIFIES POSSIBLE ELECTRICAL PROBLEM

  

  THERMOGRAPHY INSPECTION IDENTIFIES POSSIBLE ELECTRICAL PROBLEM In May 2013, Thermoscan carried out a thermography inspection for a major facility in Brisbane. During the inspection a contactor in an electrical switchboard was identified as operating above “normal” temperature and showed signs of potential failure. The item was nominated in our Inspection Report as a Priority 1. […]

• Case Study
  THERMOGRAPHY ASSISTS WITH MOISTURE INGRESS PROBLEMS

  

  THERMOGRAPHY ASSISTS WITH MOISTURE INGRESS PROBLEMS It is fair to say that many commercial buildings suffer from moisture ingress, either through internal water leaks or driving weather, that puts pressure on building subtrates. In November 2013, Thermoscan® Inspection Services were asked to assist Bells High Access Services in identifying possible water leaks through the external […]

• Case Study
  THERMOGRAPHY ASSISTS WITH COLD AIR LEAKAGE PROBLEMS

  

  THERMOGRAPHY ASSISTS WITH COLD AIR LEAKAGE PROBLEMS Thermoscan was recently requested to carry out an inspection to see if we could identify where the cold air was leaking from a large cold storage facility in Brisbane, QLD. The area under investigation was a freezer storage room where the energy costs were higher than predicted, which […]